Case

The Xbox 360 Case is made of Plastic and can easy be removed :

Remove the Harddisk
Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards

Missing image
Sideplate1.jpg

You need to remove this panel before lifting the front panel

Then remove both side pannels by inserting a small iron tool into the holes, and popping out the place holders
Slowly lift up the Front panel, by unlocking the 4 plastic placesholders about 4cm
Then insert a small tool in each hole of the backplate and onpup the back side

You now can lift up the upper part of the casing

To remove the border case, Remove 6 large screws from the down panel with a torx T10 screw driver

Missing image
Downcasing.jpg

Close-up of DVD-Drive Motherboard

Missing image
Downpannel.jpg

Close-up of the down panel